If you have a UIW Device that is prompting for activation and has the following displayed:
Please perform the following:
1. Connect to a UIW Network
a. WiFi or ethernet on campus
b. Cisco Any Connect VPN from home
|
2. Once connected click start |
|
| 3. Type CMD and run as administrator |
|
| 4. In the new window that opens type “Ping 172.16.32.170” and press enter |
|
| 5. In the new window that opens type “Ping UIW-SKMS” and press enter |
|
| 6. If steps 4 and 5 both show 0% loss then type the following “slmgr.vbs /ato” and press enter. |
|
| 7. You should receive the following popup. |
If you receive an error please contact the helpdesk for further assistance 210-829-2721.